VAIL Floor Standing Displays - 100mm Profile for SEG Graphics
Floor standing resort extrusion displays with custom silicone edge graphics feature no glare, easy installation. These trade show displays are compact and lightweight and are environmentally friendly. Use them as free-standing large light box, mount or hung overhead.
VAIL Non-Backlit Fabric Frames
All Vail frames feature Silicone Edge Graphics(SEG)
Vail profiles 40D and 60D
Vail frames with profiles
60D and 40D are resort extrusion with double-sided extrusions with
profile width of 40mm, 60 mm accordingly. These profiles have a solid
VAIL-60D is best for standing independently since the profile width is
just wide enough to provide ultimate stability. It is especially great
for wall mounting and hanging overhead because it is lightweight, but
can be used with feet to stand independently. This extrusion works great
overhead too because the thick profile width really stands out. This
extrusion is not compatible with lights (cannot be backlit).
Vail profiles 40S
With a solid outside finish
unlike the ASPEN-40D, the VAIL-40S is a single-sided extrusion with a
profile width of 40mm. The VAIL-40S is rigid because its backside has a
longer metal edge for reinforcement, making it especially great for wall
mounting and hanging overhead. Plus, it is lightweight; however, for
widths longer than 4ft., it is not recommended to be used as a
free-standing display without a support because of its thin profile
Vail profiles 60S
The VAIL-60S is a
single-sided extrusion with a profile width of 60mm and has a solid
outside finish. Because the back side of the VAIL-60S is short, it works
especially well for wall mounting letting you affix the frame in
multiple ways; however, the VAIL-60S is suitable for free-standing or
hanging overhead as well. When installing the fabric graphic, the keter
can fit 12mm deep and 3mm wide into the keter trough. This extrusion is
not compatible with lights (cannot be backlit).
Vail profiles 80S
The VAIL-80S is a single-sided extrusion
with a profile width of 80mm. Being single-sided, VAIL-80S is
particularly suitable for wall mounting applications with optional wall
mount kit. When installing the fabric graphic, the keter can fit 12mm
deep and 4mm wide into the keter trough. Edge light is included. Ladder
light is optional.
Vail profiles 100D
The VAIL-100D is a double-sided
extrusion with a profile width of 100mm. This extrusion has a solid
outside finish. Because the profile width is so thick, VAIL-100D is
especially good for free-standing large images (tall or wide) because it
is more stable than the skinnier profile widths; however, it can be
wall mounted or hung overhead.
Vail profiles 120D and 120B
VAIL-120D is a double-sided extrusion with a profile width of 120mm.
This extrusion has a solid outside finish and is rigid due to its taller
and reinforced spine. The thickest profile width we have to offer,
VAIL-120D is especially good for free-standing large images (tall or
wide) because it is more stable than the thinner profile widths;
however, it can be wall mounted or hung overhead as well as well.
Extrusions 120D and 120B are compatible with edge-lights or ladder
lights and can be backlit.
Display with Silicone Edge Graphics (SEG) are easy to use. Push fit
graphic is simple to install and replace, and is machine washable. The
light weight aluminum frame needs no tools, and collapses and folds up
quickly and easily for set up and dismantle.
To set-up the Silicone-Edged Graphics Tension Fabric Frame
Displays, you only need to unpack the frame, lay it down and straighten
it out. Then install the fabric graphic by pushing the silicone bead on
the edge of the graphic into the grooves in the frame. Finally, just
turn the feet out. In less than 10 minutes you're ready to stand up your
great looking Silicone-Edged Graphics Tension Fabric Frame Display!